Properties Of Word Button Dialog Box - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

2.3 Properties of Word Button Dialog Box

This section describes items and buttons in the Properties dialog box.
General Tab
●
Part Name
■
Enter a name for the part. The maximum number is 20 characters.
>>OFF Text, >>ON Text
■
Applies the text entered in the Part Name field to the Text field under the OFF or ON fields on the Registration
Text tab. This is used as the Registration Text when the button is OFF or ON.
To specify the Registration Text to use when the button is ON, select the Set by State check box on the
Registration Text tab. If left unchecked, the same Registration Text assigned for the OFF state is
displayed for the ON state as well.
Action Mode
■
Select the behavior of the button from the following:
Set: Pressing the button writes a constant value to a word device.
Operation and
Data written
Move: Pressing the button writes the value in the source device address to the destination word device.
Operation and
Data written
Press
view
Initial image
Action
Write
Value
Press
view
Initial image
Action
Write
Value in
device address
WindO/I-NV4 User's Manual
Release Press Release
Write
Value
Release Press Release
Write
Value in
device address
2 Word Button
8
8-23