IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 676

3 Picture Display
Trigger Condition Tab
●
The Trigger Condition tab is displayed in Advanced mode.
The Picture Display is enabled while the condition is satisfied, and it is disabled while the condition is not satisfied.
Select the operation when the condition is not satisfied as Not update Picture data or Not show Picture Display
under While not satisfying the condition.
Example: When Trigger Type is While ON, Device Address is LM0, and While not satisfying the
condition is Not show Picture Display
While LM0 is 0, the condition is not satisfied and the Picture Display does not display the picture.
While LM0 is 1, the condition is satisfied and the Picture Display displays the picture.
Trigger Type
■
Selects the condition to enable the Picture Display from the following.
Always visible: The Picture Display is always enabled.
Data
Display
10-70
LM0 :
0
Condition
Not
satisfied
LM0 : 1
Condition
Satisfied
Pic0 Pic1 Pic2
Update Update Update
WindO/I-NV4 User's Manual
MICRO/I
Hide
picture
Show
picture
Pic0 Pic1 Pic2
Update Update Update
Pic0
Update