Data Configuration - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

1.4 Data Configuration

The sampled data is composed of the channel number, message, alarm state, time, and label.
The relationship between the Alarm Log function settings and the sampled data is as follows.
Alarm Log settings
1. Data storage amount
1. Data storage amount: The amount of data that can be saved in the data storage area. For details, refer to "Data
2. Channel No.:
3. Message:
4. Alarm state and time: The alarm state (occurred, recovered, confirmed) and the time the alarm occurred, was
5. Label:
2. Channel No. 3. Message
Sampled data
Ch.No. Message
1-1 Voltage drop
1-2 Temperature abnormal
1-1 Voltage drop
1-3 Overcurrent
1-1 Voltage drop
Storage Amount" on page 13-8.
Composed of (Block No.)-(Channel No.). The device addresses to monitor and the conditions
for alarm occurrence and recovery are configured in the channels. When the sampled data is
output as a CSV file, the displayed label is "Ch.No.".
The message displayed when an alarm has occurred.
recovered from, and confirmed. When the sampled data is output as a CSV file, the
displayed label varies based on the output method.
When the sampled data is output as a CSV file, this is the text displayed in the label row.
This cannot be changed.
WindO/I-NV4 User's Manual
4. Alarm state and me
Occurrence Time Recovery Time Confirma on Time
12/01/2011 12:00:05 12/01 12:01:10 12/01 12:01:30
12/01/2011 12:01:09 12/01 12:02:21 12/01 12:02:55
12/01/2011 12:02:00 12/01 12:03:11 12/01 12:05:12
12/01/2011 12:30:21 12/01 12:55:15 12/01 13:00:00
12/01/2011 12:45:36 12/01 12:53:12 12/01 12:57:41
1 Overview
5. Label
13
13-5