IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 620

1 Numerical Input
Trigger Device Address: Specifies the bit device or the bit number of the word device that will be used to trigger
Text Color:
Plate Color:
10-14
flash.
Click to display the Tag Editor. For the device address configuration procedure, refer to
Chapter 2 "5.1 Device Address Settings" on page 2-68.
Flash intervals are set in the Flashing Cycle on the System tab in the Project Settings
dialog box.
Selects the color (color: 256 colors, monochrome: 16 shades) of text when flashing.
Click this button to display the Color Palette. Select a color from the Color Palette.
Selects the plate color (color: 256 colors, monochrome: 16 shades) when flashing.
Click this button to display the Color Palette. Select a color from the Color Palette.
This option can only be configured when Standard is selected for Image Type on the View
tab.
WindO/I-NV4 User's Manual