IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 436

2 Word Button
Trigger Type: Selects the condition to display the Button from the following.
Always visible: The Button is always displayed.
While ON:
While OFF:
While satisfying the condition: Displays the Button when the condition is satisfied.
Data Type: Selects the type of data handled by the conditional expression for the visible condition.
This option can only be configured if While satisfying the condition is selected for Trigger Type.
For details, refer to Chapter 2 "1.1 Available Data" on page 2-1.
Device Address: Specifies the bit device or the bit number of the word device to serve as the visible condition.
This option can only be configured when While ON or While OFF is selected for Trigger Type.
Click
"5.1 Device Address Settings" on page 2-68.
Condition: Specifies the conditional expression for the visible condition.
This option can only be configured when While satisfying the condition is selected for Trigger
Type.
Click
configuration procedure, refer to Chapter 2 "5.2 Setting Conditional Expressions" on page 2-71.
Comment: Used for entering a comment for the visible condition. The maximum number is 80 characters.
8-34
Button state
Displays the Button when the value of device address is 1.
1
Value of
device address
0
Button state
Hide
Displays the Button when the value of device address is 0.
1
Value of
device address
0
Button state
Show
Satisfied
Condition
Not satisfied
Button state
Hide
to display the Tag Editor. For the device address configuration procedure, refer to Chapter 2
to display the Trigger Condition Settings dialog box. For the conditional expression
WindO/I-NV4 User's Manual
Always show
Show Hide Show
Hide Show Hide
Hide
Show Show
Show Hide
Hide Show
Hide
Show