How To Enter Text - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

2.4 How to Enter Text

Use the keypad or key buttons to write character codes to device addresses with the Character Input. The input
methods are as follows.
Pressing the Character Input and Entering Text from the Standard Keypad
■
Arrange a Character Input on the screen and in its properties dialog box, on the General tab, under Keypad, select
Standard for Type.
Display values of device addresses as text
(Display mode)
Press Character Input
Display values of device addresses as text
(Entry mode)
Display values of device addresses as text
(Entry mode)
Display values of device addresses as text
(Display mode)
When the following operations are performed, entry mode is canceled and the current values of device
addresses are displayed as character codes on the Character Input. To enter text, press the Character Input
again to select it and set it to entry mode.
• CAN was pressed
• When the Focus is moved by ENT button check box on the General tab is cleared and ENT was
pressed and a value was written to the device address
MICRO/I
HG
Display standard keypad
HG_
HG SERIE
Enter text as
"HG SERIES"
Write text character
codes to device addresses
HG SERIES_
HG SERIES_
Press ENT
Close standard keypad
HG SERIES
WindO/I-NV4 User's Manual
2 Character Input
External device
D100 : 'H' 'G'
D100 : 'H' 'G'
D100 : 'H' 'G'
D101 : ' ' 'S'
'E' 'R'
D102 :
D103 : ' I ' 'E'
D104 : 'S' (NULL)
D100 : 'H' 'G'
' ' 'S'
D101 :
D102 : 'E' 'R'
D103 : ' I ' 'E'
D104 : 'S'
(NULL)
4847
(Hex)
4847
(Hex)
10
4847
(Hex)
2053
(Hex)
4552
(Hex)
4945
(Hex)
5300
(Hex)
4847
(Hex)
2053
(Hex)
4552
(Hex)
4945
(Hex)
5300
(Hex)
10-47