IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 369

Display order of drawing and parts overlapping
●
•If a drawing and part are overlapping with each other on a base screen or popup screen, the drawing or part
configured in the Properties dialog box as a top layer, then it will be displayed in the front over the other.
Example: An equilateral hexagon is placed on the base screen and a Numerical Display is placed in front of it.
Equilateral
Hexagon
Base Screen: 1
•If a part placed on a base screen or popup screen and a drawing placed on the top layer overlap, the drawing placed
on the top layer is always displayed in front.
Example: A Numerical Display is placed on the base screen and an equilateral hexagon is placed on the top layer.
Equilateral Hexagon
Top Layer
Numerical Display
Base Screen: 1
Display for Base Screen: 1
Numerical Display
1234
1234
Changes the value
9999
The display order of the equilateral hexagon
and Numerical Display is unchanged
Display for Base Screen: 1
1234
1234
Changes the value
9999
The display order of the equilateral hexagon
and Numerical Display is unchanged
WindO/I-NV4 User's Manual
4 Drawings and Parts Overlapping
Object list
No. Type
1 Equilateral hexagon
2 Numerical Display
Object list
No. Type
1 Numerical Display
567
2 Equilateral hexagon
Layer
6
Layer
Top Layer
6-7