IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 101

Bit Number
■
Specifies the bit number in a word device (0 to 15). This option can only be configured when a word device is selected
for Device Type.
Show
■
Select from the following and display the device addresses on the (Address list).
All: Displays all of the device addresses that can be used with the device selected in Target.
Used: Displays only the device addresses that are used in the active project data.
Unused: Displays only the device addresses that are not used in the active project data.
(Toolbar)
■
(Cut): Cuts the selected tag name or comment from (Address number list) and copies it to the
clipboard.
(Copy):
Copies the selected tag name or comment to the clipboard.
(Paste): Pastes the contents of the clipboard.
(Delete): Deletes the selected tag name or comment.
(Import):
Shows the Open dialog box.
Select a file with exported tag names and comments (CSV file), and then click Open to
collectively overwrite (Address number list) with the tag names and comments in the
selected file.
(Export): Displays the Export dialog box.
Select the location to save the file, enter a file name, and then click Save to save the tag
names and comments of (Address number list) as a CSV file.
(Cross Reference): Shows the Cross Reference dialog box. For details, refer to "Cross Reference Dialog Box" on
page 2-70.
(Refresh):
Updates the Use column on the Tag Editor.
(Add New Tag): Adds the Allen-Bradley tag data.
This is valid only if the Logix Native Tag(Ethernet) driver of Allen-Bradley is selected
and the external device is selected from the Target. For details, refer to the WindO/I-NV4
External Device Setup Manual.
(Edit Tag): Edits the registered Allen-Bradley tag data.
This is valid only if the Logix Native Tag(Ethernet) driver of Allen-Bradley is selected
and the external device is selected from the Target. For details, refer to the WindO/I-NV4
External Device Setup Manual.
(Address number list)
■
Displays a list of device addresses that match the specified condition.
Device Address: Displays the device addresses of the selected Device Type.
Tag Name: Displays the tag name of the address number.
Comment: Displays the comment of the address number.
Used: Displays how many times each address number has used.
The device addresses of the MICRO/I and external devices are collectively managed in Tag Editor. Tag Editor
can be displayed with the following procedures.
• On the View tab, in the Workspace group, click
• Double click Tag Editor in the Project window.
5 WindO/I-NV4 Common Operations and Settings
(Tag Editor).
WindO/I-NV4 User's Manual
2
2-69