Alarm Log Display Configuration Procedure - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

8.2 Alarm Log Display Configuration Procedure

This section describes the configuration procedure for Alarm Log Displays.
1
On the Home tab, in the Parts group, click Data Displays, and then click Alarm Log Display.
2
Click a point on the edit screen where you wish to place the Alarm Log Display.
3
Double-click the dropped Alarm Log Display and a Properties dialog box will be displayed.
4
Change the settings on each tab as necessary.
The Options tab only appears in Advanced mode.
WindO/I-NV4 User's Manual
8 Alarm Log Display
10
10-153