IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 811

Data Tab
●
Number of Data
■
Specifies the number of data to be displayed in the chart(1 to 10).
Settings
■
Lists the chart settings. The list shows the numbers, source device addresses, and colors for the chart.
No.: Shows the numbers for the chart (Ch1 to Ch10).
For Horizontal Bar and Horizontal Peak, the numbers are listed in order from top. For Vertical
Bar and Vertical Peak, the numbers are listed in order from the left.
Ch1
Ch2
Ch3
Device Address: Specifies the source word device for the data to display in the chart.
Double clicking the cell displays the Tag Editor where you can edit the device address. For the device
address configuration procedure, refer to Chapter 2 "5.1 Device Address Settings" on page 2-68
Fg. Normal: Selects the foreground color of the chart when normal. (color: 256 colors, monochrome: 16 shades)
Double clicking the cell displays the Color Palette where you can change the foreground color of the
chart when normal.
*1
Selects the foreground color of the chart when data over. (color: 256 colors, monochrome: 16 shades)
Fg. Over :
Double clicking the cell displays the Color Palette where you can change the foreground color of the
chart when data over.
*1 Advanced mode only
Ver cal Bar
Horizontal Bar
Ch1 Ch2 Ch3
WindO/I-NV4 User's Manual
1 Bar Chart
11
11-5