Data Configuration - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

1.3 Data Configuration

The sampled data is composed of the sampling time, values of device addresses, and labels.
The relationship between the Data Log function settings and the sampled data is as follows.
Data log settings
Sampled data
2. Data storage amount
Time the value of device address was sampled
1. Channel
2. Data storage amount:
3. Amount of data:
4. Sampling time label:
5. Data label:
Data No. 1 settings
Data No. 2 settings
Data No. 3 settings
4. Sampling time label
Sampling Time
01/01/2011 12:00:00
01/01/2011 12:10:00
01/01/2011 12:20:00
01/01/2011 12:30:00
01/01/2011 12:40:00
1. Channel 1 to 20
The sampled data is in channel units. A maximum of 20 channels can be configured.
The amount of sampled data to save. The maximum amount that can be configured per
device address differs according to the model. For details, refer to "Data Storage
Amount" on page 14-6.
The amount of data registered to a channel. The maximum amount of data that can be
set will depend on the Sampling Method setting. For details, refer to "Sampling
Method" on page 14-15.
When the sampled data is output as a CSV file, this label is displayed in the label row
for the sampling time column.
When the sampled data is output as a CSV file, this label is displayed in the label row
for the data number columns.
WindO/I-NV4 User's Manual
3. Amount of data
Data001 Data002 Data003
20 120 201
21 121 204
22 122 206
23 123 206
24 124 210
Data No. 3 Value of Device Address
Data No. 2 Value of Device Address
Data No. 1 Value of Device Address
1 Overview
5. Data label
14
14-5