Properties Of Message Switching Display Dialog Box - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

6.3 Properties of Message Switching Display Dialog Box

This section describes items and buttons on the properties dialog box.
General Tab
●
Part Name
■
Enter a name for the part. The maximum number is 20 characters.
Switching Method
■
Selects the method for switching message to display from the following. Messages are registered in Settings on the
Message tab.
Bit Number: Switches the message to display according to the status of bits in a device address.
Example: When Bit Number is selected and the bits of trigger device address D0 are allocated to the
following messages.
bit15
Trigger device address D0
Switches the message to display according to the status of the bits.
Bit state of
0001
Trigger Device Address D0
Message to display
Drying
Msg0
Action
Display Msg0
WindO/I-NV4 User's Manual
bit3 bit0
Message
Drying
Msg0
Heating
Msg1
Cooling
Msg2
If multiple bits are 1, display the
message for the lowest order bit.
0010 0100
Heating Cooling
Msg1 Msg2
Display Msg1 Display Msg2
If all bits in the device address are 0 or if a
bit with no associated message becomes 1,
display nothing.
6 Message Switching Display
1000 1110
Heating
Msg1
No message Display Msg1
10-119
10