IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 517

Micro/i operator interfaces for windo/i-nv4
Table of Contents

Advertisement

Properties of Word Write for Multi-Functions Dialog Box
Sets the Word Write command for the Multi-Button.
Command Name
Enter a name for the command. The maximum number is 20 characters.
Action Mode
Select the behavior of the Multi-Button from the following:
Set:
Pressing the button writes a fixed value to a word device.
Move:
Pressing the button writes a value in a source device address to a destination word device.
Set ON & OFF Data: Pressing the button writes a fixed value of ON Data to a word device.
Releasing the button writes a fixed value of OFF Data to a word device.
Add, Sub, Multi, Div, Mod, OR, AND, XOR: Pressing the button performs arithmetic on a value of source device
For details about the Action Mode, refer to "Action Mode" on page 8-23. However, Set ON & OFF Data for
the Multi-Button has the same function as Momentary for the Word Button.
Data Type
Select the data type handled by the operation selected for Action Mode.
For details, refer to Chapter 2 "1.1 Available Data" on page 2-1
UBIN16(W) and UBIN32(D) can only be set if Action Mode is set to OR, AND, or XOR.
UBIN16(W) and UBIN32(D) can only be set if Action Mode is set to Move. Because the number of
device addresses to transfer is specified in Advanced mode, you do not need to set Data Type.
If BCD4(B), BCD8(EB), or Float32(F) is selected and the arithmetic data contains a value inexpressible
in BCD, a 1 is written to System Area 2 Processing error bit (address+2, bit 5) and an error message is
displayed. For details, refer to Chapter 4 "Processing error" on page 4-32 and Chapter 36 "Processing
error" on page 36-3.
Source 1
Specify the source word device.
Click
to display the Tag Editor. For the device address configuration procedure, refer to Chapter 2 "5.1 Device
Address Settings" on page 2-68.
This setting is enabled only if Action Mode is set to Add, Sub, Multi, Div, Mod, OR, AND, or XOR.
address and a fixed value or a value of device address and writes the
result to a word device.
WindO/I-NV4 User's Manual
6 Multi-Button
8
8-115

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents