IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 852

2 Line Chart
Trigger Condition Tab
●
The Trigger Condition tab is displayed in Advanced mode.
The line chart is enabled while the condition is satisfied, and it is disabled while the condition is not satisfied. When
disabled, the plate and flange are displayed, but the chart is not displayed.
Example: When Trigger Type is While ON and Device Address is LM0
While LM0 is 0, the condition is not satisfied and the line chart is not displayed.
While LM0 is 1, the condition is satisfied and the line chart is displayed.
Trigger Type
■
Selects the condition to enable the line chart from the following.
Always visible: The line chart is always enabled.
11-46
LM0 :
Condi on
Not
sa sfied
LM0 :
Condi on
Sa sfied
Chart state
WindO/I-NV4 User's Manual
MICRO/I
Hide chart
0
100
80
60
40
20
0
-20
Show chart
1
100
80
60
40
20
0
-20
100
80
60
40
20
0
-20
Always show chart