IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 183

Skip
The data with the specified number of bytes in the receive data will be ignored.
This can be configured only when RXD is selected as Type on the Command Settings dialog box, and Skip is
selected under Type on the Data Settings dialog box.
Number of bytes
■
Specify the number of bytes (1 to 249) of receive data to be ignored.
Example: Skip for receive command data
Item
Number of bytes
In the received four byte data (1 (31h), 2 (32h), 3 (33h), 4 (34h)), only the data for 3 (33h) and 4 (34h) is received
and the two bytes of 1 (31h) and 2 (32h) are discarded.
Received data
1 2 3 4
(31h) (32h) (33h) (34h)
2 bytes
(Ignored)
Order of reception
Setting
2
Enabled data
3 4
(33h) (34h)
WindO/I-NV4 User's Manual
5 User Communication
3
3-77