Displaying Layered Base Screens - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

3 Base Screen

3.2 Displaying Layered Base Screens

It is possible to layer and display multiple Base Screens. The coordinates and display order for layered screens can be
set on the screen that will serve as the base. A maximum of 5 layered screens can be displayed.
Coordinates
■
Using the upper-left corner of the screen as the origin, the upper-left area of the layered screen become the X and Y
coordinates.
X
(0, 0)
Y
Display Order
■
This allows you to select the order of display for the screen that will serve as the base and layered screens.
Example: Displaying a Base Screen that is currently being edited as the bottom most layer
Example: Displaying a Base Screen currently being edited on the layered screen: 3.
For details about how to configure these settings, refer to "3.1 Properties of Base Screen Dialog Box" on page 5-14.
Example: When Base Screen: 100 which has a clock placed in it, is used as a layered screen, Base Screen:1 which is
displayed as the base and Base Screen: 2 will be displayed as follows:
Displayed as
the base
5-18
Base screen
Overlay screen
Overlay screen
(5 screens max)
Base screen being edited
Base screen being edited
Overlay screen: 3
Layered Screen
Base Screen: 1
130
100
120
Layering
Display for Base Screen: 1
130
100
120
11/Feb./22 Tue. 12:00
WindO/I-NV4 User's Manual
Base Screen: 100 Base Screen: 2
11/Feb./22 Tue. 12:00
Layering
Display for Base Screen: 2
11/Feb./22 Tue. 12:00
110
Displayed as
the base
110