Table of Contents
Advertisement
8 Alarm Log Display
8.3 Properties of Alarm Log Display Dialog Box
This section describes items and buttons on the properties dialog box.
General Tab
●
Part Name
■
Enter a name for the part. The maximum number is 20 characters.
Alarm Log Settings
■
Displays the Alarm Log Settings dialog box.
Default Settings
■
These options configure the default settings when the Alarm Log Display is displayed.
Start Line Number:
Sort:
Display Focus on List after changing Screens or occurring Alarms
Display Reference Screen
Displaying Alarms
■
Select these check boxes for alarms to display on the Alarm Log Display.
Not Recovered and Unconfirmed Alarm:
Not Recovered and Confirmed Alarm:
Recovered and Unconfirmed Alarm:
Recovered and Confirmed Alarm:
*1 Advanced mode only
10-154
Specifies what number alarm to display when multiple alarms have occurred.
The range that can be specified varies based on the model type.
HG5G/4G/3G/2G-V, HG4G/3G, HG2G-5F:
HG2G-5T, HG1G/1P:
Selects the display order for alarms that have occurred as Old or New.
Select this check box to automatically display the focus at the first item in the list after
switching screens and when an alarm occurs.
*1
:
Select this check box to automatically display the reference screen for the alarm that
has focus under the following conditions.
When the focus is displayed
When the focus moves
When a new alarm occurs
*1
Displays active alarms that have not been recovered and confirmed.
Displays alarms that have not been recovered but the key button CHECK
has been pressed.
Displays alarms that have been recovered but the key button CHECK has
not been pressed.
Displays alarms that have been recovered and the key button CHECK has
been pressed.
WindO/I-NV4 User's Manual
1 to 11660
1 to 5520
*1
:
Hide quick links:
Advertisement
Table of Contents
