Notch Settings Dialog Box
This dialog configures a notch for a channel. If the channel has already been set with a notch, the setting is
overwritten.
Destination Device Address
■
Specify the destination bit device or the bit number in the destination word device.
Click
to display the Tag Editor. For the device address configuration procedure, refer to Chapter 2 "5.1 Device
Address Settings" on page 2-68.
Text
■
Enter the Registration Text for the channel.
The characters that can be entered depends on the font selected for Font on the Format tab. For details, refer to
Chapter 2 "1.2 Available Text" on page 2-6.
Text ID
■
To use the text registered in the Text Manager as the Registration Text for the channel, specify the ID number from 1
to 32000.
Click
to display Text Manager.
The text ID setting is only enabled if you select the Use Text Manager check box.
Text Color
■
Select the Registration Text color for the channel (color: 256 colors, monochrome: 16 shades).
Displays the Color Palette when Color is clicked. Select a color from the Color Palette.
WindO/I-NV4 User's Manual
8 Selector Switch
8
8-149