Multi-Button Configuration Procedure - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

6 Multi-Button

6.2 Multi-Button Configuration Procedure

This section describes the configuration procedure for Multi-Buttons.
1 On the Home tab, in the Parts group, click Buttons, and then click Multi-Button.
2
Click a point on the edit screen where you wish to place the Multi-Button.
3
Double-click the dropped Multi-Button and a Properties dialog box will be displayed.
4
Change the settings on each tab as necessary.
The Trigger Condition tab and Options tab only appear in Advanced mode.
8-110
WindO/I-NV4 User's Manual