Properties Of Picture Dialog Box - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

Micro/i operator interfaces for windo/i-nv4

Table of Contents

2.2 Properties of Picture Dialog Box

This section describes items and buttons in the Properties dialog box.

Changes the picture placed on the screen. Click this button to display Picture Manager.

Select this check box to make the picture flash.

The flash interval is specified with Flashing Cycle on the System tab in the Project Settings dialog box.

Specifies the display position of the picture in coordinates.

With the upper-left corner of the screen as the origin, the upper-left corner of the rectangle that

circumscribes the picture is the X and Y coordinates.

Specifies the size of the picture in width and height.

Place on the Top Layer

Select this check box to display the picture on the top layer. The picture will have precedence when other drawings

and parts are overlapping with it. For details, refer to Chapter 6 "4 Drawings and Parts Overlapping" on page 6-5.

0 to (base screen horizontal size - 1)

0 to (base screen vertical size - 1)

1 to (base screen horizontal size)

1 to (base screen vertical size)

WindO/I-NV4 User's Manual

Show Quick Links

Table of Contents