IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 265

Project Settings
Print Content
■
Select the check boxes of the project settings to print.
System:
Communication Interface:
Communication Driver:
Communication Driver Network: Settings will be printed. The settings of external devices for which External
User Communication:
Autorun:
Web Server:
FTP Server:
Expansion Module:
External Memory Device:
E-mail:
Sub Host Communication:
O/I Link:
Font/Kanji Dictionary Data:
Printer:
BACnet/IP Settings:
1 Creating and Manipulating WindO/I-NV4 Project Data
The settings on the System tab will be printed.
Interface and Function that have been configured and the corresponding
Interface Settings will be printed.
The function of the configured external device and its Manufacturer and
Communication Driver will be printed.
Device Communication is set to N/A will not be printed.
Protocol Name will be printed. Settings for which Protocol Name is set to N/A
will not be printed.
The Enable USB Autorun and Open Popup Screen when USB Flash Drive is
inserted settings will be printed.
All settings on the Web Server tab will be printed.
All settings on the FTP Server tab will be printed.
All settings on the Expansion Module tab will be printed.
All settings on the External Memory Device tab will be printed.
All settings on the E-mail tab will be printed.
All settings on the Sub Host Communication tab will be printed.
If Function is set to O/I Link Master, then Slave Settings will be printed.
If Function is set to O/I Link Slave, then O/I Link Station will be printed.
The settings of the Optional Fonts to be downloaded and the Use Kanji
dictionary data will be printed.
All settings on the Printer tab will be printed.
Prints the settings on the BACnet/IP Settings tab.
WindO/I-NV4 User's Manual
4
4-11