IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 625

Trigger Type: Selects the condition to display the Numerical Input from the following.
Always visible: The Numerical Input is always displayed.
While ON:
While OFF:
While satisfying the condition: Displays the Numerical Input when the condition is satisfied.
Data Type: Selects the type of data handled by the conditional expression for the visible condition.
This option can only be configured if While satisfying the condition is selected for Trigger Type.
For details, refer to Chapter 2 "1.1 Available Data" on page 2-1.
Device Address: Specifies the bit device or the bit number of the word device to serve as the visible condition.
This option can only be configured when While ON or While OFF is selected for Trigger Type.
Click to display the Tag Editor. For the device address configuration procedure, refer to Chapter 2
"5.1 Device Address Settings" on page 2-68.
Condition: Specifies the conditional expression for the visible condition.
This option can only be configured when While satisfying the condition is selected for Trigger
Type.
Click to display the Trigger Condition Settings dialog box. For the conditional expression
configuration procedure, refer to Chapter 2 "5.2 Setting Conditional Expressions" on page 2-71.
Comment: Used for entering a comment for the visible condition. The maximum number is 80 characters.
Numerical
Input state
Displays the Numerical Input when the value of device address is 1.
1
Value of
Device Address
0
Numerical
Input state
Hide
Displays the Numerical Input when the value of device address is 0.
1
Value of
Device Address
0
123
Numerical
Input state
Show
Satisfied
Condition
Not satisfied
Numerical
Input state
Hide
WindO/I-NV4 User's Manual
123
Always show
123 123
Hide
Show Show
123
Hide Show Hide
123 123
Show Hide Show
1 Numerical Input
123
Hide
Show
123
10
Hide Show
123
Show Hide
10-19