How To Enter Values - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

1.4 How to Enter Values

Use the keypad or key buttons to write a value to a device address with the Numerical Input. The input methods are
as follows.
Pressing the Numerical Input and Entering Values from the Standard Keypad
■
Arrange a Numerical Input on the screen and in its properties dialog box, on the General tab, under Keypad, select
Standard for Type.
Display value of device address
(Display mode)
Press Numerical Input
Display value of device address
(Entry mode)
Display value of device address
(Entry mode)
Display value of device address
(Display mode)
When the following operations are performed, entry mode is canceled and the current value of device
address is displayed in the Numerical Input. To enter a value, press the Numerical Input again to set it to
entry mode.
• CAN was pressed
• When the Focus is moved by ENT button check box on the General tab is cleared and ENT was
pressed and a value was written to the device address
MICRO/I
1234
Display standard keypad
1234
999
Enter "999"
Write value
to device address
999
999
Press ENT
Close standard keypad
999
WindO/I-NV4 User's Manual
1 Numerical Input
External device
D100: 1234
D100: 1234
D100: 999
D100: 999
10
10-25