Chapter 5 Screen; Screen Overview; Screen Types; Screen Size - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

Chapter 5
This chapter gives an overview of the MICRO/I screen and describes how to create setup and operate the screen.
1

Screen Overview

1.1 Screen Types

The types of screens offered by the MICRO/I and screens that can be created with the WindO/I-NV4 are given below.
Screen Type
Base Screen
Screens that can
be created with
the WindO/I-NV4
Popup Screen
The screen
Maintenance
provided by the
Screen
MICRO/I

1.2 Screen Size

The screen size differs depending on the MICRO/I model selected. The size of the MICRO/I screen is equal the size of
the Base Screen.
HG5G/4G/3G-V
HG4G/3G
HG2G-V, HG2G-5F
HG2G-5T
HG1G/1P
*1 The Keypad that is displayed when operating Numerical and Character Input parts when Standard is selected under Type
in the Keypad menu for Numerical and Character Input parts.
Screen
HG5G-V HG4G-V
Base Screen
1230
Screen No.
The screen that is displayed when the MICRO/I is in Run Mode. This
1 to 3000 screen places drawing objects and parts on the base and creates a
screen that is displayed on the MICRO/I.
The Popup Screen that is displayed on the Base Screen when the
MICRO/I is in Run Mode. The size and coordinates of the screen can be
specified and this screen can also be moved on the Base Screen.
1 to 3015
A Popup Screen for the standard Keypad
in screen numbers 3001 to 3015.
Using the screen that is displayed when the MICRO/I is in Run Mode,
you can switch from Run Mode to System Mode and load a screen to
–
adjust device monitor and screen brightness.
For details, refer to Chapter 34 "1 Maintenance Screen" on page 34-1.
Model
WindO/I-NV4 User's Manual
HG4G HG3G-V HG3G HG2G-V
MICRO/I
Maintenance Maintenance Screen
System Mode
1230
Device Monitor
Adjust Brightness
×
7 8 9 CLR
4 5 6 CAN
1 2 3
ENT
0 / .
＋ −
Description
Screen Size (W x H)
1024 x 768 dots
800 x 600 dots
640 x 480 dots
320 x 240 dots
480 x 272 dots
HG2G-5F HG2G-5T HG1G HG1P
Maintenance
System Mode
Device Monitor
Adjust Brightness
Popup Screen
×
7 8 9 CLR
4 5 6 CAN
1 2 3
ENT
0 / .
＋ −
*1
will automatically be created
5-1
5