IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 67

Set Preview Size Dialog Box
Configures the size of picture selected from (Categories tab).
(Width)
(Height)
(Setting Method)
(Width)
■
Enters the width of the picture in pixels.
(Height)
■
Enters the height of the picture in pixels.
(Setting Method)
■
Selects the setting method of the picture size from the following.
I want to set both the height and the width:
I want to set just the width(height is automatically adjusted). : Lock aspect ratio and change the size of a picture.
I want to set just the height(width is automatically adjusted). : Lock aspect ratio and change the size of a picture.
Apply these settings globally to all categories
■
Select this check box to apply the specified size to all pictures.
If this check box is not selected, applies to the picture selected in (Categories tab).
Defaults
■
Returns the size configured to the picture to default.
Help
■
Displays the Symbol Factory Help.
Change the width and the height of a picture
individually. Enters the width and the height of the
picture.
Enters the width of the picture only.
Enters the height of the picture only.
WindO/I-NV4 User's Manual
1 WindO/I-NV4 Specifications
2-35
2