External Memory Device Tab - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

3.9 External Memory Device Tab

The External Memory Device tab is used to configure the destination folder on the external memory device
inserted in the MICRO/I.
External Memory Device Folder
■
Enter the folder name for the folder to use on the MICRO/I within 8 alphanumeric characters using upper-case
alphabetic characters (A to Z) and numbers (0 to 9). (Default: HGDATA01)
All the data sampled with the log functions is saved in this External Memory Device folder. For details on the external
memory device, refer to Chapter 31 "1 External Memory Devices" on page 31-1.
• You cannot use the following characters in the folder name.
. \ / : * ? " < > |
• After operation starts, the folders created in the External Memory Device folder and the file names cannot
be changed.
Remove Files
■
Select this check box to erase the files saved in the External Memory Device folder.
All Screenshots:
All Alarm Log files:
All Data Log files:
All Operation Log files:
Trigger Device Address:
*1 SD memory card for HG5G/4G/3G/2G-V, HG4G/3G and HG2G-5F, USB flash drive for HG2G-5T and HG1G/1P
HG5G-V HG4G-V
Select this check box to erase all the screenshots in the "CAPTURE" folder.
Select this check box to erase all the Alarm Log data saved in the "ALARMLOG" folder.
Select this check box to erase all the Data Log data saved in the "DATALOG" folder.
Select this check box to erase all the Operation Log data saved in the "OPERATIONLOG"
folder.
Specifies the bit device or the bit number of the word device to serve as condition to
delete the files.
Click to display the Tag Editor. For the device address configuration procedure, refer to
Chapter 2 "5.1 Device Address Settings" on page 2-68.
WindO/I-NV4 User's Manual
3 Project Settings Dialog Box
HG4G HG3G-V HG3G HG2G-V HG2G-5F HG2G-5T HG1G HG1P
*1
4
4-61