Print Button Configuration Procedure - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

4.2 Print Button Configuration Procedure

This section describes the configuration procedure for Print Buttons.
1
On the Home tab, in the Parts group, click Buttons, and then click Print Button.
2 Click a point on the edit screen where you wish to place the Print Button.
3
Double-click the dropped Print Button and a Properties dialog box will be displayed.
4
Change the settings on each tab as necessary.
The Trigger Condition tab and Options tab only appear in Advanced mode.
WindO/I-NV4 User's Manual
4 Print Button
8
8-57