IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 716

5 Message Display
Trigger Condition Tab
●
The Trigger Condition tab is displayed in Advanced mode.
The Message Display is enabled while the condition is satisfied, and it is disabled while the condition is not satisfied.
Select the operation when disabled as Not display message or Not show Message Display under While not
satisfying the condition.
Example: When Trigger Type is While ON, Device Address is LM0, and While not satisfying the condition is
Not display message.
While LM0 is 0, the condition is not satisfied and the Message Display does not display the message.
While LM0 is 1, the condition is satisfied and the Message Display displays the message.
Trigger Type
■
Selects the condition to enable the Message Display from the following.
Always visible: The Message Display is always enabled.
Message Display
10-110
LM0 :
0
Condition
Not
satisfied
LM0 : 1
Condition
Satisfied
state
WindO/I-NV4 User's Manual
MICRO/I
Hide
Show
HG SERIES
HG SERIES
Always show message