IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 711

*1
Scroll
■
Select this check box to enable scrolling display displaying of messages.
This option can only be configured when the Flash check box is cleared and Standard is selected for Image Type
on the View tab.
Speed (1: Fastest):
Start scrolling after displaying message: Select this check box to start scrolling after a message is displayed for 2
• When the Scroll check box is selected, the number of parts that can be arranged on a single screen
decreases. If the MICRO/I displays an error message, clear the Scroll check box, or reduce the number
of parts on the screen.
• When the scan time for the screen becomes longer, and when the part that has its Scroll check box
selected is placed on the top layer, the scrolling speed may become slow.
When the Scroll check box is selected operation is follows.
• Messages that include CRs are displayed without the CRs.
• Messages scroll in the direction in which the text is drawn.
• When the text displayed according to values of device addresses, the text color, or the displayed text
changes, the message is scrolled top the beginning.
Sets the scrolling speed (1 to 10). 1 is fastest, 10 is slowest.
seconds.
This check box is cleared.
Start scrolling
a message.
V
Vo
Vol
WindO/I-NV4 User's Manual
5 Message Display
This check box is selected.
Display a message
Voltage abnormal
and align left.
After 2 seconds,
oltage abnormal
start scrolling it.
ltage abnormal
10
10-105