IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 789

Micro/i operator interfaces for windo/i-nv4

Table of Contents

Specify the type of arithmetic operation to be performed on the data. The operator priority is the same as for scripts.

For details, refer to Chapter 20 "6.3 About the Priority of the Operator" on page 20-59.

Sets the arithmetic operators.

Sets the bit operator.

Bit operator

Examples of Arithmetic Formula Input

Input Examples

[LDR 0] + @ + 100

Place on the Top Layer

Select this check box to display the parts on the top layer. The parts will have precedence when other drawings and

parts are overlapping with it. For details, refer to Chapter 6 "4 Drawings and Parts Overlapping" on page 6-5.

Multiplication

Calculates remainder after dividing

Calculates the logical product (AND) of each bit of

Calculates the logical sum (OR) of each bit of

Calculates the exclusive logical sum (XOR) of each bit of

(exclusive OR)

Shifts each bit of

Shifts each bit of

To perform the arithmetic operation and input the result, add 1 to the value entered

using the Keypad and write the result to the device address.

To perform the arithmetic operation and display the result, add 1 to the value of device

address and display the result.

To perform the arithmetic operation and input the result, add the value of LDR0 to the

value entered using the Keypad and add 100, and write the result to the device address.

To perform the arithmetic operation and display the result, add the value of LDR0 to the

value of device address and add 100, then display the result.

To perform the arithmetic operation and input the result, write the logical product of the

value entered using the Keypad and 3 to the device address.

To perform the arithmetic operation and display the result, add 3 to the value of device

address and display the result.

WindO/I-NV4 User's Manual

9 Numerical Display

Show Quick Links

Table of Contents