Table of Contents
Advertisement
2.3 Properties of Multi-State Lamp Dialog Box
This section describes items and buttons on the properties dialog box.
General Tab
●
Part Name
■
Enter a name for the part. The maximum number is 20 characters.
Switching Method
■
Specify the method to switch drawing objects from the following:
Bit Number: Switches the drawing object displayed, according to the status of the bits.
Example 1: Bit Number is selected. The bits triggered in device address D0 corresponds to the
following pictures and the OFF state is None.
bit15
Value of
Trigger Device Address D0
Picture
State:
Switches the picture to display according to the status of the bits.
Bit state of
0001
Trigger Device Address D0
Picture to display
State:
Display picture
Action
for bit 0
WindO/I-NV4 User's Manual
bit3
bit0
2
State:
1
State:
0
0010
0100
State:
State:
0
1
2
Display picture
Display picture
for bit 1
for bit 2
If all bits in the device address are
0 or if a bit with no associated
picture becomes 1, display nothing.
2 Multi-State Lamp
(None)
OFF
I f m u l t i p l e b i t s a r e 1 ,
display the picture for the
lowest order bit.
1000
1110
1100
State:
State:
1
Display picture
Display picture
No picture
for bit 1
for bit 2
9
2
9-19
Hide quick links:
Advertisement
Table of Contents
