Communication Driver Network Tab - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

3 Project Settings Dialog Box

3.4 Communication Driver Network Tab

The Communication Driver Network tab is used to configure the information for external devices.
Settings
■
Edits the settings for the external devices.
External Device ID:
External Device Name: Shows the name for the external device. The default is the number (0 to 31).
You cannot use the following characters and name in the External Device Name.
• The following characters and a space
\ / : ; * ? " < > |
• (blank)
• Full width character
• The same name as another External Device ID
External Device Communication: Shows the function set for the serial interface or the Ethernet interface.
Function configured in communication drivers with a 1:1 connection in External Device Communication
cannot be set to multiple External Device ID.
4-50
HG5G-V HG4G-V
Shows the number (0 to 31) that the MICRO/I uses to manage the external devices are displayed.
Clicking the cell allows you to edit the name. The maximum number is 20 characters.
(Default: Disabled)
Clicking the cell allows you to select the function from the following items.
Disabled, External Device Communication 1, External Device
Communication 2, External Device Communication 3, External Device
Communication 4
WindO/I-NV4 User's Manual
HG4G HG3G-V HG3G HG2G-V HG2G-5F HG2G-5T HG1G HG1P