IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 677

While ON: Enables the Picture Display when the value of device address is 1.
Example: When While not satisfying the condition is Not update Picture data
Value of
Device Address
Display
While OFF: Enables the Picture Display when the value of device address is 0.
Example: When While not satisfying the condition is Not update Picture data
Value of
Device Address
Display
While satisfying the condition: Enables the Picture Display when the condition is satisfied.
Example: When While not satisfying the condition is Not update Picture data
Satisfied
Condition
Not satisfied
Display
Data Type
■
Selects the data type to be handled by the condition formula.
Can only be set if While satisfying the condition is selected as Trigger Type.
For details, refer to Chapter 2 "1.1 Available Data" on page 2-1.
Device Address
■
Specifies the bit device or the bit number of the word device to serve as condition.
Can only be set if While ON or While OFF is selected as Trigger Type.
Click to display the Tag Editor. For the device address configuration procedure, refer to Chapter 2 "5.1 Device
Address Settings" on page 2-68.
Condition
■
Sets the condition formula.
Can only be set if While satisfying the condition is selected as Trigger Type.
Click to display the Trigger Condition Settings dialog box. For the conditional expression configuration
procedure, refer to Chapter 2 "5.2 Setting Conditional Expressions" on page 2-71.
Comment
■
Used for entering comments about trigger conditions. Maximum number is 80 characters.
While not satisfying the condition
■
Selects operation of parts when condition is not satisfied.
Not update Picture data:
Not show Picture Display: Graphic is not displayed.
Data Pic0 Pic1
1
0
Do not update Update
Data Pic0 Pic1
1
0
Update Do not update
Data Pic0 Pic1
Do not update Update
The last updated graphic is displayed. The graphic does not change.
WindO/I-NV4 User's Manual
Pic2 Pic0 Pic1
Do not update Update Update
Pic2 Pic0 Pic1
Update Do not update Do not update
Pic2 Pic0 Pic1
Do not update Update Update
3 Picture Display
Pic2 Pic0
Update Do not update
Pic2 Pic0
Do not update Update
Pic2 Pic0
Update Do not update
10-71
10