Table of Contents
Advertisement
Message Tab
●
Use Text Manager
■
Select this check box to use text registered in Text Manager.
Settings
■
Edits the message settings.
No.:
Shows the message number (Msg number).
The number of messages that can be registered varies based on Switching Method on the
General tab.
Bit Number:
Value:
Message:
Enter the text to display.
Double clicking the cell allows to edit the Message. The maximum number is 3750 characters. You
can enter multi-line messages by inserting a newline.
The characters that can be entered vary based on the font selected for Font on the Format tab. For
details, refer to Chapter 2 "1.2 Available Text" on page 2-6.
This option can only be configured if the Use Text Manager check box is cleared.
• To display the backslash (\), enter a backslash (\) before the backslash (\).
• A line feed is added with pressing and holding ALT and ENTER keys.
Change:
Selects whether or not to configure Text and Plate per Msg number. For N, the colors are
configured by Text Color on the Format tab and Plate Color on the View tab.
Double clicking the cell toggles between Y as Yes and N as No.
Text:
Selects the text color for the messages when configuring the text color per Msg number (color: 256
colors, monochrome: 16 shades).
Double clicking the cell displays the Color Palette where you can change the Text Color.
Plate:
Selects the plate color for the messages when configuring the plate color per Msg number
(color: 256 colors, monochrome: 16 shades).
Double clicking the cell displays the Color Palette where you can change the Plate Color.
Msg0 to Msg15
Msg0 to Msg999
WindO/I-NV4 User's Manual
6 Message Switching Display
10-121
10
Hide quick links:
Advertisement
Table of Contents
