Key Button Configuration Procedure - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

5 Key Button

5.2 Key Button Configuration Procedure

This section describes the configuration procedure for Key Buttons.
1 On the Home tab, in the Parts group, click Buttons, and then click Key Button.
2
Click a point on the edit screen where you wish to place the Key Button.
3
Double-click the dropped Key Button and a Properties dialog box will be displayed.
4 Change the settings on each tab as necessary.
The Trigger Condition tab and Options tab only appear in Advanced mode.
8-74
WindO/I-NV4 User's Manual