Using Data And Detected Alarms; Displaying Saved Data With The Alarm Log Display - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

4

Using Data and Detected Alarms

4.1 Displaying Saved Data with the Alarm Log Display

1 On the Configuration tab, in the System Setup group, click Alarm Log.
The Alarm Log Settings dialog box is displayed.
2
Select the type of device address to monitor under Source Device Address Type on the Channel tab and specify
Number of Blocks.
3
Select the channel number to register and click Edit.
The Individual Settings dialog box is displayed.
4
Specify the device address to monitor in Source and select Store under Data.
HG5G-V HG4G-V HG4G HG3G-V
WindO/I-NV4 User's Manual
4 Using Data and Detected Alarms
HG3G HG2G-V HG2G-5F HG2G-5T HG1G HG1P
13
13-31