Table of Contents
Advertisement
3
Select Manufacturer and Communication Driver and then click OK.
Manufacturer
■
Select the manufacturer name of the external device used.
Communication Driver
■
Shows the communication driver list for the select manufacturer. Select the communication driver to use.
Expression of Device Address Format
■
Select the format for the device address.
Allen-Bradley:
Enter device addresses in the Allen-Bradley format.
Example: B 10:123/5
WindO/I-NV4:
Enter device addresses in the WindO/I-NV4 format.
Example: B 1012305
This option can only be configured when Allen-Bradley is selected for Manufacturer.
You can return to the Select Communication Driver dialog box and change its setting by clicking
Previous.
This concludes creating project data.
Next you will create a screen. For details, refer to Chapter 5 "3.1 Properties of Base Screen Dialog Box" on page 5-14.
1 Creating and Manipulating WindO/I-NV4 Project Data
WindO/I-NV4 User's Manual
4
4-3
Hide quick links:
Advertisement
Table of Contents
