Pie Chart Configuration Procedure - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

3.2 Pie Chart Configuration Procedure

This section describes the configuration procedure for pie charts.
1
On the Home tab, in the Parts group, click Charts, and then click Pie Chart.
2 Click a point on the edit screen where you wish to place the Pie Chart.
3
Double-click the dropped Pie Chart and a Properties dialog box will be displayed.
4
Change the settings on each tab as necessary.
The Options tab only appears in Advanced mode.
WindO/I-NV4 User's Manual
3 Pie Chart
11
11-53