IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 601

Trigger Condition Tab
●
The Trigger Condition tab is displayed in Advanced mode.
Visible Condition
■
The Multi-State Lamp is displayed while the condition is satisfied. The Multi-State Lamp is hidden while the condition
is not satisfied.
Example: When Trigger Type is While ON and Device Address is LM0
While LM0 is 0, the condition is not satisfied and the Multi-State Lamp is hidden.
While LM0 is 1, the condition is satisfied and the Multi-State Lamp is displayed.
Trigger Type: Selects the condition to display the Multi-State Lamp from the following.
Always
visible:
While ON: Displays the Multi-State Lamp when the value of device address is 1.
LM0 :
0
Condition
Not
satisfied
LM0 : 1
Condition
Satisfied
The Multi-State Lamp is always displayed.
Multi-State
Lamp state
1
Value of
device address
0
Multi-State
Lamp state
Hide
WindO/I-NV4 User's Manual
MICRO/I
Hide
Show
Always show
Hide
Show Show
2 Multi-State Lamp
9
Hide
Show
9-27