Data Log Settings Dialog Box - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

3

Data Log Settings Dialog Box

This section describes the items and buttons on the Data Log Settings dialog box and the Individual Settings dialog box.
3.1 Data Log Settings Dialog Box
All the device addresses to sample values from and their sampling conditions and Condition of Writing to Data Storage
Area are collectively managed in the Data Log Settings dialog box.
Settings
■
Edits the Data Log settings for each channel.
Channel No.:
Log function:
Channel Name:
Condition of Writing: Shows the condition for writing to data storage area. Double clicking the cell switches between
Data Size:
HG5G-V HG4G-V
Shows the channel number. Double clicking the cell displays the Individual Settings dialog box
where you can edit the settings. For details, refer to "3.2 Individual Settings Dialog Box" on page
14-16.
Shows whether or not the Data Log function is used. Double clicking the cell switches between
Enable and Disable. If switched to Disable, that channel's settings all return to the default
settings.
Shows the channel name. Double clicking the cell displays the Individual Settings dialog box
where you can edit the settings. For details, refer to "3.2 Individual Settings Dialog Box" on page
14-16. This option can only be set when Enable is selected in Log Function.
Fixed Period, Event Bit, and Event Word. This option can only be set when Enable is
selected in Log Function.
Shows the data size for the device address that is the Condition of Writing to Data Storage
Area. Double clicking the cell switches between 16-bit and 32-bit. This option can only be set
when Event Word is selected in Condition of Writing to Data Storage Area.
WindO/I-NV4 User's Manual
3 Data Log Settings Dialog Box
HG4G HG3G-V HG3G HG2G-V HG2G-5F HG2G-5T HG1G HG1P
14
14-13