ON Time
■
Configures the time to write 1 to the Report Device Address according to the type of data.
• After 1 is written to the Report Device Address with ON Time, that value is retained.
Report Device Address
M0 value
Time
• After a screen configured with the Calendar is displayed, if the time is in between ON Time and OFF
Time, 1 is written to the Report Device Address.
Report Device Address
M0 value
Time
OFF Time
■
Select this check box to configure the time to write 0 to the Report Device Address.
The time is configured according to the type of data.
• The value of Report Device Address is retained even when the current time exceeds OFF Time.
Report Device Address
M0 value
• After a screen configured with the Calendar is displayed, if the time exceeds OFF Time, 0 is written to
the Report Device Address.
Report Device Address
M0 value
Time
Report Device Address
■
Specifies the bit device to write the value to at ON Time and OFF Time.
Click
to display the Tag Editor. For the device address configuration procedure, refer to Chapter 2 "5.1 Device
Address Settings" on page 2-68.
1
0
09:00
09:30
1
0
09:00
09:30
ON Time
1
0
Time
10:00
10:30
1
0
10:00
10:30
ON Time
WindO/I-NV4 User's Manual
Value of device address retained after ON Time elapses
10:00
10:30
ON Time
Writes 1 to notify that ON Time has already elapsed
10:00
10:30
Turn on MICRO/I power
Open screen
Value of device address retained after OFF Time elapses
11:00
11:30
OFF Time
Writes 0 to notify that OFF Time has already elapsed
11:00
11:30
OFF Time
Turn on MICRO/I power
Open screen
10 Calendar
11:00
11:00
OFF Time
12:00
12:00
10-191
10