Bit Write Command Configuration Procedure - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

1.2 Bit Write Command Configuration Procedure

This section describes the configuration procedure for the Bit Write Command.
1
On the Home tab, in the Parts group, click Commands, and then click Bit Write Command.
2
Click a point on the edit screen where you wish to place the Bit Write Command.
3
Double-click the dropped Bit Write Command and a Properties dialog box will be displayed.
4 Change the settings on each tab as necessary.
WindO/I-NV4 User's Manual
1 Bit Write Command
12
12-3