Picture; Picture Configuration Procedure - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

2 Picture

2 Picture

2.1 Picture Configuration Procedure

This section describes the picture configuration procedure.
1
On the Home tab, in the Drawings group, click Picture.
The mouse cursor changes to
2
Click the location on the edit screen to place the picture.
Picture Manager is displayed.
3
Select a picture and click Select.
The selected picture is placed on the screen.
To change the picture that was placed on the screen, perform one of the following operations.
• Double click the picture to open the Properties dialog box, then click Browse
• Replace the picture in Picture Manager
7-24
HG5G-V HG4G-V
(picture).
WindO/I-NV4 User's Manual
HG4G HG3G-V HG3G HG2G-V HG2G-5F HG2G-5T HG1G HG1P