Changing Project Settings - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

1.6 Changing Project Settings

Changing Product Series
●
This section describes how to change the product series set in the project data being edited.
1
Click Change Product Series on the status bar.
The Change Product Series dialog box is displayed.
2
Select Product Series, Model, and Installation, and then click OK.
The Save As dialog box is displayed.
3
Specify the save location and file name, and then click Save.
1 Creating and Manipulating WindO/I-NV4 Project Data
WindO/I-NV4 User's Manual
4
4-19