IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 752

7 Alarm List Display
*1
Scroll
■
Select this check box to enable scrolling display displaying of messages.
Can only be set when One Line is selected for Display Type under the General tab.
For Alarm List Display, this can only be set if One Line is selected for Display Type under the General tab.
Speed (1: Fastest):
Start scrolling after displaying message: Select this check box to start scrolling after a message is displayed for 2
• When the Scroll check box is selected, the number of parts that can be arranged on a single screen
decreases. If the MICRO/I displays an error message, clear the Scroll check box, or reduce the number
of parts on the screen.
• When the scan time for the screen becomes longer, and when the part that has its Scroll check box
selected is placed on the top layer, the scrolling speed may become slow.
When the Scroll check box is selected operation is follows.
• Messages that include CRs are displayed without the CRs.
• Messages scroll in the direction in which the text is drawn.
• When the text displayed according to values of device addresses, the text color, the displayed text, or the
alarm state changes, the message is scrolled from the beginning.
*1 Advanced mode only
10-146
Sets the scrolling speed (1 to 10). 1 is fastest, 10 is slowest.
seconds.
This check box is cleared.
Start scrolling
Page
Up
a message.
Page
Down
Page
V
Up
Page
Down
Page
Vo
Up
Page
Down
Page
Vol
Up
Page
Down
WindO/I-NV4 User's Manual
This check box is selected.
Display a message
Page
Voltage abnormal
Up
and align left.
Page
Down
After 2 seconds,
Page
oltage abnormal
Up
start scrolling it.
Page
Down
Page
ltage abnormal
Up
Page
Down