IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 125

29 Repeat steps 26 through
• The data are displayed in Data List in the order they were set. To change the order of data, select data,
and then click Up or Down to shift it.
• Click Expand Data List to hide Type, Trigger Condition and Detail, the number of the data displayed
in Data List will increase.
30
Click OK.
The receive command configured in Command List and Data List on Project Settings dialog box is displayed.
To add a transmission command, repeat steps
28 to specify all the data for the receive command.
8
through
WindO/I-NV4 User's Manual
19
. To add a receive command, repeat steps
5 User Communication
3
20 29
through .
3-19