IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 617

Format Tab
●
Font
■
Selects the font used for displaying text from the following.
Standard, Windows, Stroke, 7-Segment
The characters that can be displayed depend on the font. For details, refer to Chapter 2 "1.2 Available Text" on page 2-6.
Size
■
When Standard is selected, selects the text size as 8x16 or 16x16.
When Stroke or 7-Segment is selected, specifies the text size (8 to 128).
Style
■
Selects Regular or Bold for text style.
Can only be set when Standard is selected for Font.
Magnification
■
W, H: Selects text magnification (0.5, 1 to 8).
Can only be set when Standard is selected for Font.
Align Text
■
Selects the text alignment in the horizontal direction from the following.
Left, Center, Right
For details, refer to Appendix "5 Text Alignment" on page A-7.
Text Color
■
Selects the color of displayed text (color: 256 colors, monochrome: 16 shades).
Click Color to display the Color Palette. Select a color from the Color Palette.
This option can configure the text color in display mode and in entry mode. However, for Entry Mode text color can
be set only when the Reverse check box is cleared.
Reverse
■
Select this check box to reverse the text color and plate color during display mode when in entry mode.
Can only be set when Standard is selected for Image Type under the View tab.
WindO/I-NV4 User's Manual
1 Numerical Input
10
10-11