IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 710

5 Message Display
Vertical Writing
■
Select this check box when displaying text vertically.
Can only be set when Font is set to Japanese, European, Chinese, Taiwanese, Korean, Central European,
Baltic, or Cyrillic.
When the Vertical Writing check box is selected, take care about the following points. This is applicable
for Windows supports East Asian characters.
• When there is a mixture of double-byte and single-byte characters, the half-width characters are left-
aligned.
Aligned to
le edge
• Dashes are displayed horizontally. Symbols representing voiced and semi-voiced sounds of single-byte
characters are shown as follows.
Horizontal
display
• When using text displayed according to values of device addresses, the characters are counted as single-
byte characters and the display area for the characters is indicated by dotted lines. Therefore, when the
text to display according to values of device addresses is double-byte characters, the display area
actually required differs from the area indicated by the dotted lines.
Example: When 1 word of text to display according to values of device addresses is set to vertical writ-
2 single-byte chars. 1 double-byte char.
Dotted line frame is
2 chars. High
Align Text depending on the length of the displayed message
■
Select this check box to align text as standard to the number of characters that will be displayed.
This option is only displayed when the Align the text area (Character Input/Message Display/Numerical
Input/Numerical Display) check box is selected in the Project Settings dialog box, on the Compatible tab.
When cleared, the maximum number of characters (set number of words) is always aligned as standard.
Example: When there are 2 characters of text to always display on the first line, 6 characters of text to always display
on the second line and 6 characters of text (3 words) to display according to values of device addresses,
Align Text Horizontal is set to Center, and the text to display according to values of device addresses is
blank (when only 6 characters are always displayed on the second line)
1st line text :
2nd line text :
Text Color
■
Selects the color of displayed text (color: 256 colors, monochrome: 16 shades).
Click Color to display the Color Palette. Select a color from the Color Palette.
*1 Advanced mode only
10-104
Next
characters
ing, the vertical size of the dotted lines is displayed as 2 single-byte characters.
AB
Blank
AB CD EF
Always show Show according to
values of devices
WindO/I-NV4 User's Manual
*1
Check box: Selected
AB
AB C D EF
Characters to show
Check box: Cleared
AB
AB C D EF
Maximum characters