Autorun Tab - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

3 Project Settings Dialog Box

3.10 Autorun Tab

The Autorun tab is used to configure the functions for a USB flash drive inserted in the MICRO/I. For details, refer to
Chapter 31 "2 USB Autorun Function" on page 31-22.
Enable USB Autorun
■
Select this check box to enable the USB Autorun function.
The USB Autorun function automatically displays a menu screen from which the user can execute predefined
commands when a USB flash drive is inserted in the MICRO/I.
Open Popup Screen when USB Flash Drive is inserted
■
Select this check box to display a popup screen when a USB flash drive is inserted in the MICRO/I.
Screen Number:
Coordinates X, Y:
4-62
HG5G-V HG4G-V HG4G
Specifies the popup screen number (1 to 3015) to display when a USB flash drive
is inserted in the MICRO/I.
Specifies the coordinates to display the popup screen.
With the upper-left corner of the screen as the origin, the X and Y coordinates are
the upper-left corner of the popup screen.
The units and range for the display coordinates are as follows.
Specify the coordinates in 1 dot units.
X: 0 to (base screen horizontal size - 1)
Y: 0 to (base screen vertical size - 1)
WindO/I-NV4 User's Manual
HG3G-V HG3G HG2G-V HG2G-5F HG2G-5T HG1G HG1P