Make A Sound Of The Buzzer And Flash The Screen When An Alarm Has Occurred - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

4.3 Make a Sound of the Buzzer and Flash the Screen when an Alarm has Occurred

1 On the Configuration tab, in the System Setup group, click Alarm Log.
The Alarm Log Settings dialog box is displayed.
2 Select the type of device address to monitor under Source Device Address Type on the Channel tab and specify
Number of Blocks.
3
Select the channel number to register a message to and click Edit.
The Individual Settings dialog box is displayed.
4
Specify the device address to monitor in Source and select Store under Data.
5
Select Enable under Alarm function, configure NO/NC and Lock/Unlock, and click OK.
You are returned to the Alarm Log Settings dialog box.
WindO/I-NV4 User's Manual
4 Using Data and Detected Alarms
13-37
13